When it comes to die-casting zinc alloys, there should still be a significant number of people who are not familiar with the technology behind this process. The die-casting of zinc alloys is a casting method that is utilized frequently. There are certain circumstances that can arise during the process of opening the mold die casting defects causes and solutions for zinc alloy die-casting, and these can lead to certain flaws in the finished product. Molten metal may splash as a result of the following causes: If the mold is not opened with enough force.

The surface of the cavity has a rough texture, or there are various items in the cavity. Make the necessary adjustments to the length of the push rod. On the surface of the die alloy die casting company casting, there are small holes or pores. The reason for this is that there is an excessive amount of lubricant, and the vent hole is clogged. Because of the intense competition in the market, natural selection will inevitably take place; therefore, it is important to differentiate yourself from your competitors. The length of the push rod could be shorter.

Because the products that are die-cast by the die-casting machine have a high temperature and some products are easy to stick to the mold while die-casting, lubricating oil needs to be sprayed during production. As a result of this, the requirements for the conveyor belts that are used for metal die-casting products include high temperature resistance as well as oil resistance.

Conveyor belts that are resistant to heat are utilized in high temperature resistant canvas belt conveyors. Different accessories are added in accordance with the products of the customer as well as other factors. In the metal die-casting workshop, the products have a high temperature after the casting process has been completed. Skateboards are attached to the uppermost part of the rack, and the product box can be automatically accessed by the skateboards. When the product has reached the desired temperature, the skateboards aluminum casting will move the product to the next location on the belt.

Why is it that castings can't have the surfaces anodized like other materials can?

Why is it that castings can't have the surfaces anodized like other materials can?.

After the anodizing process, there will be a significant amount of floating dust on the surface, which will have a negative impact on the anode's surface quality. During the removal of silicon in the pre-treatment phase, we found that die-casting dense material is very different from aluminum extrusion, forging, and stamping, and has a high silicon content. Die-casting parts are not anodized in most cases because die-casting dense material is very different from aluminum extrusionWe use a process known as hard anodic oxidation in order to improve the dependability and quality of the anode layer in areas such as wear resistance, corrosion resistance, weather resistance, and other similar areas. Additionally, the appearance of the surface treatment is significantly improved in comparison to that of ADC12 due to the fact that the silicon content of ADC6 is generally less than 1. The film thickness is extremely high, coming in at over 100 um. When it comes to choosing die-casting factories for collaboration, customers run into some difficulties. The second factor that it is determined by is that it is determined by the structure of the mold. The mold for the zinc alloy die-casting process has a complicated structure. The amount of difficulty in the production process will increase proportionally with the number of corners and corners that there are.